Fisher ROC Ethernet

Product Overview

The Fisher ROC Ethernet device driver exchanges data between OPC/DDE clients and Remote Operation Controllers (ROC) protocol devices. This driver is intended for use with the following ROC protocol devices: FloBoss 100, 407, and 500 Series; ROC 300 Series - ROCPAC; ROC 300 Series - FlashPAC; and RegFlo.

• Supports Automatic Tag Generation directly from the RTU or configuration file for rapid deployment of communications
• Communication Specification
• Operator Identification
• Time synchronization on EFM poll, user-specified interval, or time of day
• Read, Write, and Auto Tag Generation of User Program data (User Defined Points)
• Supports OpCodes 10 and 11 for reading and writing to user tables
• Supports OpCode 167 for single point reads
• Supports OpCode 180 for multiple point reads in a single request
• Supports Advanced Statistics Tags, including _CommFailures, _ErrorResponses, and more
• Supports the VCone meter type and calculation method
• Optimized for extreme conditions (noisy communication channels and low-bandwidth)

• ROC

• FloBoss 100 Series
• FloBoss 407
• FloBoss 500 Series
• RegFlo
• ROC 300 Series - FlashPAC
• ROC 300 Series - ROCPAC

• English

• DDE Format CF_Text and AdvancedDDE
• NIO Interface for iFIX
• OPC .NET Service (OPC .NET) Version 1.00
• OPC Alarms and Events (OPC AE) Version 1.10
• OPC Data Access (OPC DA) Versions 1.0a, 2.0, 2.05a, and 3.0
• OPC Unified Architecture (OPC UA) Clients
• SuiteLink and FastDDE for Wonderware

• Fisher ROC Ethernet Manual

Access and search all Kepware product release notes here.

Features when part of the EFM Suite

• Gas Electronic Flow Measurement (EFM) Support
• EFM Configuration and Mapping
  • History, including Gas Chromatograph data
    • Hourly
    • Daily
  • Alarms
  • Events

• EFM Suite
• Fisher ROC Suite
• Oil and Gas Suite